Life Fitness Discover SE3HD Owner's Manual page 53

Setting
System Sounds
Marathon Mode
Life Fitness On
Demand
Nightly Reboots
Telemetry
Speed Increase
Limiting with Up Key
Fit Test Plus
Treadmill Only
Setting
Maximum Speed
Minimum Speed
Maximum % Incline
Activity Zone Speed
Keys
Stride Sensor (95T
only)
Deceleration Rate
Acceleration Rate
Turn OFF Stride
Sensor Notification
PowerMill Only
Setting
Warm Up Speed:
Level 0 (12-19 SPM)
High Speeds: Level
21-25 (160-182 SPM)
Default Description
On This option controls whether the system speaker beep is generated
on key presses.
Enabled This option allows the user to workout indefinitely.
Off This option activates complete access to the growing library of Life
Fitness instructor-led classes.
NOTE: The library will only appear if the unit is connected to the
internet. 2.5 Mbps of bandwidth per unit recommended for optimal
functioning.
Off When turned on, the console will detect the least active time of day
for the unit and automatically reboot every 24 hours at that time. This
is recommended for optimal functioning of streaming services, like
Life Fitness On Demand or Netflix.
Enabled Switching on the telemetry feature makes it possible to use the
Polar
telemetry heart rate chest strap for monitoring the heart rate.
Off When enabled, the user cannot press and hold the speed button to
increase the speed.
On Turns on/off the US Navy test and FAMS
Default Description
14.0 MPH (23 KPH) Set the fastest speed the treadmill can operate.
0.5 MPH (0.8 KPH ) Set the slowest speed the treadmill can operate.
15.0 This option changes the maximum incline grade to a value lower than
15%.
Enabled This option allows the user to assign belt speed to Walk / Jog / Run
values.
On This option automatically pauses the workout if the user steps off the
belt.
3 The rate at which the treadmill decelerates to the selected speed,
ranging from 1 (slowest) to 5 (fastest).
3 The rate at which the treadmill accelerates to the selected speed,
ranging from 1 (slowest) to 5 (fastest).
Stride Sensor Button This option detects a user using a treadmill but will not go into Pause
On Pause Button mode if a user is not detected.
Disabled
Default Description
Off This option, if enabled, controls whether or not Level 0 may be used
in program setup or during a workout. Level 0 corresponds to
intensity levels below Level 1.
On This option controls whether or not Levels 21 though 25 may be used
in program setup or during a workout (MANUAL and SPEED
INTERVAL workouts ONLY).
®
-compatible Heart Rate Zone Training exercises with a Polar
Page 51 of 86