Table of Contents
Advertisement
Front bezel dust filter
Some models are equipped with an optional front bezel dust filter. You must periodically clean the dust filter
so that the dust collected on the filter does not impede air flow through the computer.
NOTE:
The optional front bezel dust filter is available from HP.
Before removing the dust filter, follow these steps:
Prepare the computer for disassembly
▲
Remove the dust filter:
1.
Use your fingers to separate the filter from the front bezel at the tab locations shown in the following
illustration.
2.
Use a soft brush or cloth to clean dust from the filter. If heavily soiled, rinse the filter clean with water.
(Preparation for disassembly on page
20).
Front bezel dust filter
21
Hide quick links:
Advertisement
Table of Contents
