Channel Setting; Auto Channel Scan - Philips DVDR3506/37B Quick Start Manual

If you have changed antenna connection, we recommend that you program available channels in your area with the
following procedures.

Auto Channel Scan

Note
• If the auto channel preset is canceled during
presetting, some channels not yet preset may not be
received.
24 24 EN EN
E7H42UD_DVDR3506-37_EN.indd 24 E7H42UD_DVDR3506-37_EN.indd 24

CHANNEL SETTING

1
Press [SETUP] and use [K / L] to
select "General Setting", then press
[OK].
"General Setting" menu will appear.
2
Use [K / L] to select "Channel", then
press [OK].
"Channel" menu will appear.
3
Use [K / L] to select "Auto Channel
Preset", then press [OK].
4
Use [K / L] to select the type of
broadcasting signal, then press [OK].
General Setting
Playback
Display Auto Channel Preset
Video Manual Channel Preset
Auto Channel Preset
Recording TV Audio Select
Clock
Antenna
Channel
Cable (Analog)
DivX
Cable (Analog / Digital)
HDMI
Reset All
The unit will start getting channels available in
your area.
• When aerial antenna is connected, select
"Antenna".
• When connected to CATV, select "Cable
(Analog)" or "Cable (Analog/Digital)".
To cancel the auto channel preset during
scanning:
Press [BACK ] or [SETUP] to cancel.
5
When scanning is over, press [SETUP]
to exit.
To cycle through only the memorized channels, use
[CH / ].
To select a channel directly (including the ones not
memorized), use [the Number buttons].
2007/12/28 10:52:58 2007/12/28 10:52:58