Setting The Clock; Setting The Rf Out Channel - Philips VR140/07 Operating Manual

Setting the clock

If the display shows an incorrect time or ' --:-- ',
the time and date must be reset manually.
1.
1.
Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2. Press . The main menu will appear.
MENU
3.
3.
Select 'INITIAL SET UP' with
and confirm with
STOP C-L
4.
4. Select 'CLOCK' with
and confirm with
TIME --:--
DATE --/--/--
END=EXIT
5.
5. Check the time in 'TIME'. If required, please
change the time with
6.
6.
Check 'DAY', 'MONTH' and 'YEAR' in the
same way.
7.
7.
To end, press
STATUS/EXIT
PLAY B-K
FWD 1- B
or
PLAY B-K STOP C-L
.
FWD
1- B
.
0..9
.

Setting the RF out channel

In some reception locations it is possible that a
TV channel will be sent on the same or similar
frequency as the video recorder.
Result: As soon as the video recorder is
switched on, the reception quality for this or sev-
eral other TV channels will decrease.
or
The following steps will show you how to change
.
the pre-set 'transmission' (RF out channel) fre-
quency on the video recorder.
What is RF out channel?
This electronic component in the video recorder
allows the device to transmit audio and video
signals via the aerial cable. These signals can
be received on a TV set just like TV channels.
What is RF out channel frequency?
This frequency or channel indicates the channel
on which the audio or video signal is transmit-
ted.
1.
1.
Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.
Press
3.
3.
Select 'INITIAL SET UP' with
STOP C-L
4.
4. Select 'RF OUT' with
and confirm with
5.
5. Press
6.
6.
Press
free (not allocated) channel between channel
22 and 69 in your area.
7.
7. Press
If you cannot get an interference-free picture
and sound, switch the built-in modulator off.
Press
STOP C-L
next to "RF OUT CH" on the TV screen.
Then confirm with
please connect your VCR to your TV with a
Scart cable.
8.
8.
To end, press
8
. The main menu will appear.
MENU
and confirm with
PLAY B-K
FWD 1- B
SELECT K L CHOOSE B
RF OUT CH 35
END=EXIT
.
FWD 1- B
,
or
PLAY B-K STOP C-L
FWD 1- B .
repeatedly until "--" appears
. In that case,
FWD 1- B
.
STATUS/EXIT
or
PLAY B-K
.
FWD 1- B
or
STOP C-L
.
0..9 to select a
EN