Philips DVDR3506/37B Quick Start Manual page 94

Video (cont'd)
1
Progressive Scan (Default : OFF)
This unit is compatible with the progressive scan system.
The feature provides you with the higher definition
images than the traditional output system does. To utilize
this feature, you must set progressive scan mode to "ON".
1) Use [K / L] to select "ON", then press [OK].
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All
2) Use [{ / B] to select "Yes", then press [OK].
General Setting
Playback
Activating progressive scan:
Display
Check your TV has progressive scan
Video
and connect with component video cable.
Rcording
Clock
Channel
NOTE :
Reset All
If there is no picture or picture is
distorted after selecting
Wait about 15 seconds for auto recovery.
Activate?
3) Use [K / L] to select "Yes" within 15 seconds, then
press [OK].
Your setting will be activated.
Note
• If your TV is compatible with progressive scan (525p /
480p), you are recommended to use the HDMI or
component video cable (commercially available) to
connect this unit to the TV. (Refer to "Method 3" or
"Method 4" on pages 16 and 17.) If not, use the RCA
video cable and set the progressive scan to "OFF" or
press and hold [SETUP] for more than 3 seconds
during DVD playback.
• When selecting "No" or not pressing any buttons on
the unit or remote control within 15 seconds at step 3,
progressive scan remains to be "OFF" (interlace scan).
94 94 EN EN
E7H42UD_DVDR3506-37_EN.indd 94 E7H42UD_DVDR3506-37_EN.indd 94
SETUPS
Progressive Scan
TV Aspect
Progressive Scan
Video Input
ON
OFF
Progressive
TV Aspect
Progressive
Select Video
ON
OFF
"Yes",
Yes No
2
TV Aspect (Default: 4:3 Letter Box)
You can select the TV aspect ratio to match the formats of
what you are playing back with the unit and your TV
screen (4:3 standard or 16:9 widescreen TV).
Use [K / L] to select a setting, then press [OK].
General Setting
Playback
Display Progressive Scan
Video TV Aspect
TV Aspect
Recording Video Input
4:3 Letter Box
Clock
4:3 Pan & Scan
Channel
16:9 Wide
DivX
HDMI
Reset All
If you have a standard TV:
Select "4:3 Letter Box", so that black bars appear on the
top and bottom of the TV screen when playing back a
wide-screen picture. Select "4:3 Pan & Scan" for a full
height picture with both sides trimmed when playing
back wide-screen picture.
If you have a widescreen TV:
Select "16:9 Wide".
2007/12/28 10:54:30 2007/12/28 10:54:30