Philips DVDR3506/37B Quick Start Manual page 97

HDMI (cont'd)
1
Format (Default : RGB)
You can select the color space for HDMI output.
Set the appropriate color space for your display device.
Use [K / L] to select a setting, then press [OK].
• When the connected device is not compatible with the
Y/Cb/Cr, HDMI signal is output as RGB regardless of the
setting.
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All
Your setting will be activated.
2
HDMI Audio (Default : ON)
If you do not want to output the audio through HDMI
(when you digitally output the audio through the
COAXIAL DIGITAL AUDIO OUTPUT jack to your audio
system, etc.), you can set the HDMI audio output off.
Use [K / L] to select a setting, then press [OK].
• Set to "OFF" when not outputting the HDMI sound.
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All
Your setting will be activated.
3
RGB Range (Default : Normal)
You can adjust the RGB range to make the dark areas of
the HDMI images brighter.
Use [K / L] to select a setting, then press [OK].
• Select "Enhanced" if the black-white contrast is not clear.
• This setting is effective only for HDMI RGB output.
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All
Your setting will be activated.
E7H42UD_DVDR3506-37_EN.indd 97 E7H42UD_DVDR3506-37_EN.indd 97
SETUPS
Format
HDMI Audio
Format
RGB Range
RGB
YCbCr
Format
HDMI Audio
HDMI Audio
RGB Range
ON
OFF
Format
HDMI Audio
RGB Range
RGB Range
Normal
Enhanced
EN EN 97 97
2007/12/28 10:54:34 2007/12/28 10:54:34