Napoleon HIGH COUNTRY NZ5000 Installation Manual page 27

3
Close door. Locate the two hex screws on the left side
of the door that secures the bearing assembly.
Do not loosen the bearing bolts.
5
If the right side of the door is not resting on the hearth
when the door is fully closed, signifi cantly loosen (but do
not remove) the upper hex screw.
4
If the left side of the door is not resting on the hearth
when the door is fully closed, signifi cantly loosen (but do
not remove) the lower hex screw.
6
Pull the door down fully until it is completely resting fl at
on the hearth.
fi nishing
EN
27
W415-1720 / 08.21.17