Philips HDRW720/05 User Manual page 59

To erase the Time Shift buffer choose from the following:
Erase the Time Shift Buffer manually ('
'function( SYSTEM MENU
'menu))
Turn off the DVD recorder with STANDBY m
The GUIDE Plus+ ® system provides the DVD recorder with data on
the start and end time of TV shows. These are shown as black bars on
the time bar.
1 In case the time bar of the Time Shift Buffer is not visible on the
C
screen, press INFO
on the remote control.
2 Press REC/OTR n
1
.
P
The red light around the record button n
will switch on.
P
' will appear on the screen on the right end of
the time bar.
This indicates that the recording will automatically end at the
end of the TV show.
If you want to record the next TV show of the same TV
channel as well, press REC/OTR n
' will appear.
REC/OTR n 1
A
button, '
2
0
on the front
1
again. '
C D
M K
The preset Time Shift Buffer period expires (the default
setting is 3 hours)
Switch to camcorder mode using CAM
the same function button)
.
If no data is available from the GUIDE Plus+
recording is made from a satellite receiver connected to the EXT1
N
TO TV-I/O
display any data on the beginning, end, and title of the TV show.
1 In case the time bar of the Time Shift Buffer is not visible on the
screen, press INFO
2 Press REC/OTR n
P
The red light around the record button n
will switch on.
P
'
of the time bar. This indicates that the recording will
automatically end after 30 minutes. Press
REC/OTR n
time.
D
D K
You can also start a recording immediately, regardless of the
recordings in the Time Shift Buffer.
1 Hold down REC/OTR n
button n 0
®
M
, EXT2 AUX-I/O socket, the time bar will not
C
on the remote control.
1
.
' will appear on the screen on the right end
1
several times to prolong the switch-off
REC/OTR n
1
1
until the red light on the record
at the front switches on.
3
(switch back with
system, or in case the
0
on the front
D K C M
C M
D
D