Aerial Cable; G-Link Transmitter - Philips HDRW720/05 User Manual

If you have connected an external receiver (satellite receiver, set-top
box, cable TV box), you must also install it in the GUIDE Plus+
system. TV programmes (TV channels) that you can only watch via the
receiver can also be displayed in the GUIDE Plus+
programmed for recording.
You can connect up to three external receivers to this DVD-Recorder.
J
GUIDE/TV
0
TUNER
CHANNEL q P
M
EXT2 AUX-I/O
J
GUIDE/TV
A I
C M
B
1 Select with B
or A
O
' ' and confirm with OK
2 Read the information on the screen and confirm with OK
3 Select the type of the external receiver.
This setting serves to preselect the type used.
This selection depends on the country and the GUIDE Plus+
system provider. Therefore, some types may have no function.
4 Confirm with OK
L
.
If you selected ' ', no external receiver is installed.
A B
® system and be
CHANNEL r S
C M
O L
OK
I
in the ' ' screen the line
L
.
5 Select your provider from the list.
If you do not have a provider, select '
6 Confirm with OK
7 Select the brand of your external receiver from the list. If your
provider is printed on your receiver (e.g. Sky,...), you must choose
the provider as brand.
Depending on the brand and provider you selected, a limited
selection will appear.
Browse through the pages of the list using
CHANNEL q
a
b
®
b
CHANNEL r
8 Press OK
L
9 Select the input socket of the DVD recorder to which the receiver
is connected.
If the receiver is connected via the aerial cable only, proceed
as follows:
- Select '
- Enter the channel number under which the external receiver
is stored in the DVD recorder. (e.g.: channel number 'P 04').
Use the number buttons 0..9 , or B
L
.
C M
®
0 Confirm with OK
If the G-LINK transmitter was not connected to the G-LINK
socket, connect it and adjust as decribed in the chapter
'Connecting additional devices'.
L
.
P , CHANNEL r S
CHANNEL q
S
.
' and confirm using OK
.
L
.
'
.
P
L
.
O , A I , D K
,