Philips HDRW720/05 User Manual page 42

Here you can allocate the programme numbers to the corresponding
TV channels and switch them on/off for the programme listings ('
screen). Moreover, you can define the use of the TV channels on the
external receiver.
1 Press B
O
.
2 Select the TV channel you want to change using B
Use the D K and C
This tile contains the TV channels with their short descriptions and
indicates whether the TV channel is displayed in the programme listing
(' ' screen) or not.
You can switch on/off a TV channel for the '
the red function button
Here you can make or change the basic settings such as language,
country, external receiver. Moreover, you can watch an automatic
demonstration of the GUIDE Plus+
B
D C
O , A
M
buttons to switch between tiles.
' screen using
D
.
® system.
This tile contains the TV channel properties and the programme
numbers. You can modify channel allocation or assign an external
receiver. In order to assign a receiver, it must be already installed in
the GUIDE Plus+ ® system.
To change allocations, proceed as follows:
1 Select the TV channel you want to change using B
2 Press the green function button
3 Enter the programme number of the TV channel using the number
buttons 0..9 . You can only enter programme numbers of TV
channels that have already been installed.
'
I
.
Please observe that in the case of modified TV channels, the transfer of
GUIDE Plus+ ® channel data may take up to 24 hours.
All the settings you have already made are displayed here. Select the
desired line using B
more information on the settings, read section 'Setting up the GUIDE
Plus+ ® system' in chapter 'The GUIDE Plus+
Here you can view a demonstration of the different functions of the
GUIDE Plus+ ® system.
Start the automatic presentation with OK
If you start the demonstration, programmed recordings may be
deleted.
If you cancel the presentation by pressing OK
to the setup menu.
E
.
B O A I
E
or A
O I
and confirm with OK
® system'.
L
.
L
, A
O I
.
D
L
. For
, you will go directly