Philips HDRW720/05 User Manual page 21

You can also connect a video recorder or a DVD player to the EXT2
M
AUX-I/O
input socket.
The DVD recorder must be connected
N
EXT1 TO TV-I/O socket. If there is a video recorder in between
the picture quality may be poor because of the copy protection system
built into the DVD recorder.
To copy camcorder recordings, you can use the front sockets. These
sockets are located behind the flap on the right hand side.
Recordings from the front sockets are stored on the HDD to make
editing easy. Then you can transfer them to a DVD+RW, DVD+R using
the 'Archiving-function'.
If you have a DV or Digital 8 camcorder, connect the DV IN
F
(CAM2)
input of the DVD recorder to the appropriate DV output
on the camcorder.
Choose ' ' as programme number for this input.
to the TV via the
If you have a Hi8 or S-VHS(C) camcorder, connect the S-VIDEO
(CAM1)
output on the camcorder.
You must also connect the audio input L AUDIO R (CAM1)
the DVD recorder to the audio output on the camcorder.
Choose '
If you have a camcorder that only has a single video output (Composite
Video, CVBS), connect the VIDEO (CAM1)
recorder to the appropriate output on the camcorder.
You must also connect the audio input L AUDIO R (CAM1)
the DVD recorder to the audio output on the camcorder.
Choose '
If you already have an external receiver (satellite receiver,
set-top box, cable TV box) connected to this socket, you can
connect the video recorder to the 'VCR', 'TO VCR', ...socket
of the external receiver.
C
input of the DVD recorder to the appropriate S-VHS
' as programme number for this input.
' as programme number for this input.
E
on
D
input on the DVD
E
on