Philips HDRW720/05 User Manual page 35

If the channel assignments of your cable or satellite TV provider change
or if you are reinstalling the DVD recorder, e.g. after moving house,
you can start this procedure again. This will replace the stored TV
channels with the new ones.
•) Switch on the TV, and if necessary, select the programme number
for the DVD recorder.
•) Switch on the DVD recorder.
1 Press the BROWSER HDD
A
MENU button on the remote control.
P
The 'SYSTEM MENU' appears.
2 Select '
' using B O
3 Press C
M
to select '
H
button and then the SYSTEM
.
'.
4 Select the line '
C M
.
P
A message appears on the screen that the change of this
setting will flush the 'Time Shift Buffer'.
If the 'Time Shift Buffer ' contains important recordings, save
them with the REC/OTR n
chapter 'The Time Shift Buffer'.
5 Select '
' with D K
and confirm with OK
If the message window was closed, confirm the line with
C M
again.
6 Select '
' using B
7 Press C
M
.
P
'Autoinstall' starts. This allows the DVD recorder to save all
available TV channels. This procedure may take several
minutes.
h
P
When all the TV channels have been found, '
' will appear on the TV screen.
8 To end, press SYSTEM MENU
You can read about how to search for a TV channel manually in
'Manual TV channel search'.
' using B O
and confirm with
1
button first. Refer to the
L
.
O or A I
.
A
.