Philips DVDR75/051 Operating Instructions Manual page 59

You can use this function if you own a satellite receiver that can control other devices via a
scart cable and a programming function (timer). For more information, please see the operating
instructions for the satellite receiver.
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
SYSTEM-MENU on the remote control. The menu bar
Press
appears.
3
' symbol with D or C .
Select '
4
Select '
C .
5
' using CH- B or CH+ A .
Select '
6
' with D or C .
Select '
To switch off the function, select '
7
Confirm with OK .
8
Use a scart cable to connect scart socket EXT 2 AUX-I/O on the
DVD recorder to the corresponding scart socket on the satellite
receiver.
9
To end, press SYSTEM-MENU .
0
Insert a disc you want to use for recording.
A
Programme the satellite receiver with the required information
(programme number of the TV channel, start time, end time).
If necessary, please see the operating instructions for your satellite
receiver.
B
Switch off the DVD recorder using STANDBY m . 'SAT' also
appears in the display to indicate that the function is active.
The DVD recorder is now ready to record. The start and end of the recording is controlled via
scart cable EXT 2 AUX-I/O .
' using CH- B or CH+ A and confirm with
' using C or D .
Manual recording