Philips DVDR75/051 Operating Instructions Manual page 32

Installing your DVD recorder
3
CH+ A and
Use the
0..9 on the remote control to select the TV channel for which you
want to use the decoder. If necessary, use the MONITOR button to
switch to the internal tuner.
4
Press the SYSTEM-MENU button on the remote control. The menu
bar appears.
5
' symbol with D or C .
Select '
6
' using CH- B or CH+ A and confirm with C .
Select '
7
Select '
C .
8
' using CH- B or CH+ A .
Select '
9
' with D or C .
Select '
Use C to select '
' in the '
0
Confirm with OK .
A
To end, press SYSTEM-MENU .
Your decoder has now been allocated to this TV channel.
In some cases, not all of the available TV channels may have been found and stored during initial
installation. In this case, you will need to search for and store the missing or coded TV channels
manually.
With 'Easy Link', the DVD recorder will automatically download the TV
channels stored on the TV set. This is why some lines have no function. To
store new TV channels, they must first be stored on the TV set. The
information will then be transferred to the DVD recorder automatically.
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Switch on the DVD recorder using STANDBY/ON m .
3
Press SYSTEM-MENU on the remote control. The menu bar
appears.
4
' symbol with D or C .
Select '
CH- B buttons or the number buttons
' using CH- B or CH+ A and confirm with
' line on the screen (Decoder off).