Philips DVDR75/051 Operating Instructions Manual page 19

2
Open the battery compartment, insert the batteries as shown and
then close the battery compartment.
The remote control is now ready to use.
Its range is approximately 5 to 10 meters.
In the following sections, you will need the remote control for the first time.
Aim the remote control at the DVD recorder and not at the TV set.
The necessary cable connections must be made before you can record or playback TV
programmes using your DVD recorder.
Connect the DVD recorder
the picture quality may be poor.
We recommend that you use a scart cable to connect your TV set and DVD recorder.
The scart or Euro AV cable serves as the universal connector for picture,
sound and control signals. With this type of connection, there is practically no
loss of quality in picture or sound transmission.
When you install your DVD recorder for the first time, select one of the following options:
If your TV set is equipped with 'Easy Link, Cinema Link, NexTView Link, Q-Link, Smart Link,
Megalogic, Datalogic, ...' and you wish to use a scart cable.
If your TV set is not equipped with 'Easy Link, Cinema Link, NexTView Link, Q-Link, Smart Link,
Megalogic, Datalogic, ...' and you wish to use a scart cable.
If your TV set is equipped with an S-Video(SVHS) socket.
If your TV set is equipped only with an video(CVBS) socket.
to your TV set. If there is a video recorder in between
Connecting the DVD recorder