Philips DVDR75/051 Operating Instructions Manual page 36

Installing your DVD recorder
6
' using CH- B or CH+ A .
Select '
7
Press C .
8
'Autoinstall' starts. Wait until all the TV channels have been found.
This can take several minutes.
9
When Autoinstall has finished, '
the TV screen.
0
The date and time have been set and stored.
A
To end, press SYSTEM-MENU .
You can read about how to search for a TV channel manually in 'Manual TV channel search'.
After you have performed the automatic channel search you may not agree with the sequence in
which the individual TV channels have been allocated to the programme positions (programme
numbers). You can use this function to rearrange the TV channels already stored or to delete
TV channels you don't want or those with poor reception.
With Easylink, you can search for and store TV channels only on the TV set.
These settings are then accepted by the DVD recorder.
That is why you cannot select this function manually.
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Switch on the DVD recorder. Press the SYSTEM-MENU button on
the remote control. The menu bar appears.
3
' symbol with D or C .
Select '
4
' using CH- B or CH+ A and confirm with C .
Select '
5
Select '
with C .
' will appear on
' using CH- B or CH+ A and confirm