MULTIQUIP LD6 Operation Manual page 22

22
15. Seat Switch — Safety feature stops blade rotation
when the operator leaves the seat. The trowel blades
will not rotate unless the operator is seated.
16. Retardant Spray Control Button (Left Side) —
Located on the left-side steering control handle, this
button controls the flow of retardant spray when the
optional retardant spray kit is installed.
17. Retardant Spray Nozzle (Optional) — Part of the
optional retardant spray kit. The spray nozzle delivers
uniform coverage of retardant over the slab surface.
18. Foot Switch — Actuates the rotors. Depress the foot
switch to turn the rotors. Release the foot switch to
stop the rotors.
19. Light, Right Front (Optional) — One of six LED lights
included with the optional light kit.
20. Tie-Down Locations (4) — Secure tie-down straps to
these attachment points when transporting the trowel.
PAGE 22 — LD6 RIDE-ON POWER TROWEL • OPERATION MANUAL — REV. #0 (02/10/20)
23
25
24
P/N 45650
C
20
21
Figure 9. LD6 Trowel Components (Cont.)
COMPONENTS (TROWEL)
15
C
26
19
18
20
21. Hydraulic Motor (Right Side) — This durable,
high-torque hydraulic motor rotates the right-side
spider assembly.
22. Engine Throttle Lever — Controls engine speed. Push
this lever forward to increase engine speed. Pull this
lever backward to decrease engine speed.
23. Key Switch — Insert the ignition key here and turn
clockwise to start the engine.
24. Rotor Speed Control Lever — Controls blade rotation
speed. While holding down the foot switch, push the
rotor speed control lever forward to increase rotor
speed. Pull the lever backward to decrease rotor speed.
25. Light, Right Rear (Optional) — One of six LED lights
included with the optional light kit.
26. Light, Right Side (Optional) — One of six LED lights
included with the optional light kit.
16
17