Table of Contents
Advertisement
About This Document
This document is intended for personnel who will be installing the Baicells Nova-227 Outdoor
2*250mW Time Division Duplexing (TDD) eNodeB (eNB). The information includes preparation
of installation tools and materials and procedures for properly installing the eNB, entering
basic configuration, and verifying the eNB is operational. Please be advised that only personnel
with the appropriate electrical skills and experience should install this device.
Copyright Notice
Baicells Technologies, Inc., copyrights the information in this document. No part of this
document may be reproduced in any form or means without the prior written consent of
Baicells Technologies, Inc.
Disclaimer
The information in this document is subject to change at any time without notice. For more
information, please consult with a Baicells technical engineer or the support team. Refer to
the "Contact Us" section below.
Disposal of Electronic and Electrical Waste
Pursuant to the WEEE EU Directive, electronic and electrical waste must not be
disposed of with unsorted waste. Please contact your local recycling authority for
disposal of this product.
Revision Record
Date
Version
17-Dec-2019
V1.7
6-Dec-2019
V1.6
30-Aug-2019
V1.5
Description
Sync IGs
Updated for RTS 3.4.8, new
PLMN, general info
Updated capacity info,
specs, eNB RTS 3.3.x & OMC
5.0.7 screens, China v02
2
SMEs/Contributors
Sonny May
Sharon Redfoot
Jesse Raasch, Sonny
Sharon Redfoot
May
Author/Editor
Advertisement
Table of Contents
