Figure 2-1: LEDs & Interface
Table 2-2: LEDs
Identity
Color
PWR
Green
ACT
Green
RUN
Green
ALM
Red
Table 2-3: Interfaces
Interface Name
ETH/PoE+
2.4 Location & Environment
When determining where to place the eNB, you need to consider factors such as climate,
hydrology, geology, the possibility of earthquakes, reliable electric power, and transportation
access. Refer to the technical specifications in
Status
Steady on
OFF
Steady on
OFF
Fast flash: 0.125s on, 0.125s off
Slow flash: 1s on, 1s off
OFF
Steady on
OFF
Description
RJ-45 interface, used for data configuration or data backhaul, and
PoE+ power supply
Description
Power is on
No power supply
The cell is activated
The cell is not activated
The board is loading
The board is normal
No power input, or board fault
Hardware alarm, e.g., VSWR
No alarm
Appendix
A.
10