DAILY MAINTENANCE SCHEDULE
NOTE: If attempting any service repair work disconnect the battery by
depressing the toggle on the circuit breaker.
Inspect unit frame for structural damage.
Inspect wheels and tires. Grease the wheels if required. Ensure the
cotter pins are in place.
Inspect all bolts and fasteners are in place and secure.
Inspect the load straps for damage. Nicks or tears are not acceptable.
Inspect the push button switches and rocker switch for condition and
operation. Make sure the wiring is secure.
Test the circuit breaker for operation. Cycle the unit testing for
operation, direction and smoothness.
Observe the roller operation in the outer frame rails. Oil rollers as
required. Inspect the drive screws and ballnuts for damage, bending
during operation, and lubrication.
Ensure the operation manual is readily available for reference.
Keep the battery fully charged.
FOR PARTS AND SERVICE CONTACT:
1-800-697-Mate
8.05
®
PowerMate
Operation Manual
PN 013820 Rev.D2
Eng. 12/ 12/ 12