Important Safety Information - Pentair ControlPro Series Installation Manual

Filtration & backwash controller
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
This guide provides installation and operation instructions for ControlPro. Consult Pentair with any questions
regarding this equipment.
Attention Installer: This guide contains important information about the installation, operation and safe use of
this product. This information should be given to the owner and/or operator of this equipment after
installation or left on or near the product.
Attention User: This manual contains important information that will help you in operating and maintaining
this product Please retain it for future reference.
Before installing this product, read and follow all warning notices and instructions which are included. Failure to follow
the instructions in this manual may result in serious adverse health effects, or even serious or fatal injury. Failure to
follow the instructions in this manual will in all cases invalidate all guarantees and liability on the part of the
manufacturer.
Codes and Standards
ControlPro and Pentair Pool pumps must be installed in accordance with the local building and installation codes.
RISK OF ELECTRICAL SHOCK OR ELECTROCUTION.
The electrical supply to this product must be installed by a licensed, certified electrician or qualified personnel in
accordance with all applicable local codes and ordinances. Improper installation will create an electrical hazard which
could result in death or serious injury to pool or spa users, installers, or others due to electrical shock, and may also
cause damage to property. Read and follow the specific instructions inside this guide.
Do NOT attempt any internal adjustments inside the product
If you are not familiar with your pool filtering system and other systems attached to the pool:
a. Do NOT attempt to adjust or service without consulting your dealer or a professional pool contractor.
b. Read the entire Installation & User's Guide before attempting to use, service or adjust the ControlPro or pool
filtering system.
Consumer Information and Safety
ControlPro is designed and manufactured to provide safe and reliable service when installed, operated and
maintained according to the information in this manual and the installation codes referred to in later sections.
Throughout the manual, safety warnings and cautions are identified by the "
comply with all of the warnings and cautions.
Do not permit children to use this product.
Warranty Information
ControlPro is sold with a limited factory warranty. Details are specified in our product catalogue. Make all warranty
claims to an authorized Pentair dealer or directly to the factory. Claims must include the heat pump serial number and
model (this information can be found on the rating plate), installation date, and name of the installer. Shipping costs
are not included in the warranty coverage. This warranty does not cover damage caused by improper assembly,
installation, operation, improper water chemistry balancing or other chemical abuse, or improper sanitation
application, winterizing, field modification, or failure to earth bond and properly ground the unit. Any changes to the
system or improper installation may void the warranty.
4
ControlPro

Important Safety Information

" symbol. Be sure to read and

Advertisement

Table of Contents
loading

This manual is also suitable for:

Controlpro cpro-1010

Table of Contents