Pentair ControlPro Series Installation Manual page 6


Correct installation is required to assure safe operation. The requirements for ControlPro include the following:

ControlPro is not a standalone system. The main unit that connects to the pump and other systems has to
be installed in a DIN rail cabinet. 180mm of free space (10 modules) is required.

A 1x12 module electrical cabinet (CPRO-2020) or 2x12 module cabinets ( CPRO-2030) is available as an
option.

ControlPro can be used to manage single speed pumps (both 3 and single phase).

StaRite S5P1R-VS and S5P2R-VS or Pentair SuperFlo VS can be managed at their 4 different speeds.

It is at this date NOT POSSIBLE to connect IntelliFlo Variable speed pumps to the ControlPro system

When installing ControlPro with solar panels the optional temperature sensor H-52-0272 is required.

It is possible to install one extra Control Unit (order CPRO-2010)

ControlPro requires a 230V power supply.
This manual provides the information needed to meet these requirements. Review all application and installation
procedures completely before continuing the installation.
Your packaging contains the following components.
1. Contactor
2. Interface module
3. Control Unit
5. Temperature Sensor
6. Accessories bag
7. Hose Clamp
8. Manual
6 ControlPro