Lexus LS460 2011 Owner's Manual page 74

1-2. Opening, closing and locking the doors and trunk

Setting and canceling the functions
To switch between setting and canceling, follow the procedure
below.
STEP 1
Close all the doors and switch the "ENGINE START
STOP" switch to IGNITION ON mode. (Perform the step 2
within 10 seconds.)
STEP 2
Shift position linked door lock-
ing function
Shift position linked door
unlocking function
Speed linked door locking func-
tion
Driver's door linked door unlock-
ing function
When the setting or canceling operation is complete, all doors are
locked and then unlocked.
72
LS460_EE
Shift lever posi-
Function
Shift the shift lever to "P" or
"N", press and hold the driver's
door lock
( or ) for about 5 sec-
onds then release.
The shift lever and switch posi-
tions corresponding
desired function to be set are
shown as follows.
Use the same procedure to can-
cel the function.
Driver's door
lock switch posi-
tion
tion
P
N
switch
to the