Lexus LS460 2011 Owner's Manual page 504

3-3. Using the audio system
Repeat play

Repeating a file/track
Touch "RPT" on the screen.

Repeating all of the files in a folder (USB memory)
Touch and hold "RPT" on the screen until "FLD.RPT" appears.

Canceling scan, repeat and random playback
Touch "SCAN", "RPT" or "RAND" on the screen once again.

About iPod

Apple is not responsible for the operation of this device or its compli-
ance with safety and regulatory standards.

iPod is a trademark of Apple Inc., registered in the U.S. and other coun-
tries.

iPod functions

When an iPod is connected and the audio source is changed to iPod
mode, the iPod will resume play from the same point in which it was last
used.

Depending on the iPod that is connected to the system, certain functions
may not be available. If a function is unavailable due to a malfunction
(as opposed to a system specification), disconnecting the device and
reconnecting it once again may resolve the problem.

While connected to the system, the iPod cannot be operated with its own
controls. It is necessary to use the controls of the vehicle's audio system
instead.

USB memory functions

Depending on the USB memory that is connected to the system, the
device itself may not be operable and certain functions may not be avail-
able. If the device is inoperable or a function is unavailable due to a mal-
function (as opposed to a system specification), disconnecting the device
and reconnecting it once again may resolve the problem.

If the USB memory still does not begin operation after being discon-
nected and reconnected, format the memory.
476
LS460_EE