Table of Contents
Advertisement
Switching the door unlock function
It is possible to set which doors the entry function unlocks using wireless
remote control.
STEP
1
Turn the "ENGINE START STOP" switch OFF.
STEP
2
Cancel the intrusion sensor and tilt sensor of the alarm system to
prevent unintended triggering of the alarm during the setting
change. (P. 124)
STEP
3
When the indicator light on the key surface is not on, press and
hold either
holding
The setting changes each time an operation is performed, as shown below.
(When changing the setting continuously, release the buttons, wait for at
least 5 seconds, and repeat step 3.)
Multi-informa-
tion display
LS460_EE
1-2. Opening, closing and locking the doors and trunk
or
for about 5 seconds while pressing and
on the key.
Unlocking doors
Hold a door handle to
unlock all doors
Hold the driver's door han-
dle to unlock only the
driver's door
Hold a passenger's door
handle to unlock all the
doors
Hold the door handle to
unlock the front and rear
doors on your side
Hold the door handle to
unlock the door
Beep
Exterior: Beeps twice
Interior: Rings once
Exterior: Beeps 3
times
Interior: Rings once
Exterior: Beeps 4
times
Interior: Rings once
Exterior: Beeps once
Interior: Rings once
1
47
Hide quick links:
Advertisement
Table of Contents
