Lexus LS460 2011 Owner's Manual page 134


Deactivating or stopping the alarm
Do one of the following to deactivate or stop the alarm:
 Unlock the doors or trunk using the entry function or the
wireless remote control.
 Turn the "ENGINE START STOP" switch to IGNITION
ON mode or start the engine. (The alarm will be deactivated
or stopped after a few seconds.)
Intrusion sensor and tilt sensor (if equipped)
This system is designed to deter and prevent vehicle theft but does
not guarantee absolute security against all intrusions.
 The intrusion sensor detects an intruder or movement in the
vehicle.
 The tilt sensor detects changes in vehicle inclination, such as
when the vehicle is towed away.
The intrusion sensor and tilt sensor can be canceled using the cancel
switch.

Canceling the intrusion sensor and tilt sensor
To cancel the intrusion sensor and tilt sensor, perform the necessary
procedure each time canceling the sensors is desired.
LS460_EE
1-6. Theft deterrent system
Turn the "ENGINE START
STOP" switch OFF and press
the intrusion sensor and tilt sen-
sor cancel switch.
A message will be shown on the
multi-information display in the
instrument cluster. Pressing the
switch again will re-enable the
intrusion sensor and tilt sensor.
1
125