Toro Z Master Professional 5000 Series Operator's Manual page 68

Figure 104
1. Clutch pulley
2. Mower belt
3. Spring-loaded idler pulley
4. Ratchet
7. Remove and retain the hardware on both sides
of the deck as shown in
106.
g009038
5. Square hole in the idler
arm for the ratchet
6. Idler grease fitting
7. Belt guide
Figure 105 or Figure
5000 Series Machines
1. Right stabilizer
2. Deck strut (right side shown)
3. Remove the shoulder bolt and nut.
4. Remove the shoulder bolt and nut.
6000 Series Machines
1. Right stabilizer
2. Deck strut (right side shown)
3. Remove the shoulder bolt and nut.
4. Remove the shoulder bolt and nut.
8. Raise the deck struts and secure them in the
raised position.
68
Figure 105
Figure 106
g010252
g009197