Toro Z Master Professional 5000 Series Operator's Manual page 10

127-0326
1. Read the Operator's
Manual.
2. Height-of-cut
1. Check hydraulic fluid every 50 operating hours.
2. Read the Operator's Manual for information on lubricating
the machine.
decal127-0326
3. Remove the key from
the ignition and read the
Operator's Manual before
performing maintenance
or servicing the machine.
Some or all of these symbols are on your battery.
1. Explosion hazard
2. No fire, open flame, or
smoking
3. Caustic liquid/chemical
burn hazard
4. Wear eye protection.
5. Read the Operator's
Manual.
1. Indicates the blade is identified as a part from the original
machine manufacturer.
125–9383
3. Check the tire pressure every 50 operating hours.
4. Read the Operator's Manual before servicing or performing
maintenance.
10
Battery Symbols
6. Keep bystanders a safe
distance away from the
battery.
7. Wear eye protection;
explosive gases can
cause blindness and other
injuries.
8. Battery acid can cause
blindness or severe burns.
9. Flush eyes immediately
with water and get medical
help fast.
10. Contains lead; do not
discard
Manufacturer's Mark
decalbatterysymbols
decaloemmarkt
decal125-9383