Toro Z Master Professional 5000 Series Operator's Manual page 36

Figure 43
5. For all other machines, grease the mower deck
idler-pulley pivot until grease comes out the
bottom (Figure 44).
Figure 44
6. Grease the drive belt idler arm
g009029
7.
8.
9.
10.
11.
12.
g185957
(Figure 43).
13.
36
Figure 45
Remove the dust cap and adjust the caster
pivots.
Note:
Keep the dust cap off until greasing is
complete. Refer to Adjusting the Caster-Pivot
Bearing (page 51).
Remove the hex plug.
Thread a grease fitting into the hole.
Pump grease into the fitting until it oozes out
around the top bearing.
Remove the grease fitting in the hole.
Install the hex plug and dust cap
Figure 46
Grease the caster-wheel bearings
g009030
(Figure 46).
g009187
(Figure 46).