Avaya 1400 Series Application Notes page 5

5. Configure Avaya Aura® Communication Manager
These Application Notes assume that Communication Manager is configured and operational.
There are no additional settings required to be configured for the connection of the Jabra PRO
920 headset and Jabra LINK cable adapter to the Avaya telephones. The compliance tests with
the Jabra 14201-20 Adapter were carried out with the default server settings for audio
parameters.
This section describes the step to provision the digital phone in Communication Manager via a
System Administration Terminal (SAT) command. For detailed information on how to configure
and administer the Communication Manager, please refer to Section 9 [1].
Use the command Add Station <n> to add a new extension for the digital phone in the
Communication Manager, where <n> is an available extension, as shown in figure below. Enter
the model of digital phone in the Type field, port number in the Port field, a name in the Name
field and keep other fields as default. Press F3 on the keyboard to submit the form.
Figure 2: Sample of Adding Station in Communication Manager
KP; Reviewed:
SPOC 1/13/2012
Solution & Interoperability Test Lab Application Notes
©2012 Avaya Inc. All Rights Reserved.
5 of 8
Link14201-20Dig