DJG Deluxe High Back 65 Instructions Manual page 24

It may be easier to tighten the
vehicle belt through the belt
path opening as shown.
4.
Tighten the Tether Strap
With knee still in child
restraint, push down on the
child restraint again and pull
on free end of the tether strap
to tighten.
5.
Check Vehicle Belt
Tightness
Grasp the child restraint
at the belt path with one
hand. Push and pull the child
restraint from side to side,
forward and back. The child
restraint should not move
more than 2.5 cm (1 in) and
the vehicle belt should not
loosen.
NOTE: If it moves more than 2.5 cm (1 in.) or if the vehicle belt
loosens, try reinstalling the child restraint or try another seating
location.
6.
Secure Child in Child
Restraint
45
4358-6862A Deluxe High Back 65 ENG.indd 47-48 4358-6862A Deluxe High Back 65 ENG.indd 47-48
G-1 Prepare to Install Booster Seat
18-45 kg (40-100 lbs) and 102-132 cm (40-52 in.) and at
least 4 years old. Booster seat using only vehicle lap/
shoulder belt.
You MUST remove the
harness system (see
section C-5) to use this
seat as a booster seat.
Use only the vehicle's lap and shoulder
belt system when restraining the child in
this booster seat.
Do not use the harness system when using
as a booster seat.
Do not use the UAS belts
or the tether strap when
using as a booster seat.
You must store both UAS
and tether strap.
Do not use this booster seat if
the midpoint of your child's ears
are above the top of the booster
seat's headrest.
Do not use this seat with the kickstand
folded under.
Failure to follow these warnings can result
in serious injury or death.
46
Lap/Shoulder Belt
6/15/18 7:49 PM 6/15/18 7:49 PM