Calibrating The Touch Screen - Siemens SIMATIC KTP400 Basic Operating Instructions Manual

5.7

Calibrating the touch screen

KTP400 Basic, KTP600 Basic, KTP1000 Basic, TP1500 Basic
Operating Instructions, 08/2008, A5E01075587-01
5
6
New calibration settings have been measured.
Tap the screen to register saved data.
Wait for 30 seconds to cancel saved data and
keep the current setting.
9
Time limit: 30 sec
Configuring the operating system
5.7 Calibrating the touch screen
1. Press the "OP" button to open the
"OP Properties" dialog.
2. Change to the "Touch" tab.
10
3. Press the "Recalibrate" button to
open the calibration screen.
4. Touch the cross in the screen center
using the touch pen or your finger.
5. Use the touch pen
6. or your finger to touch the
7. crosshair handles in the corners
8. of the screen.
9. Touch the cross in the screen center
once again using the touch pen or
your finger to confirm your entries.
10. Close the dialog and save your
entries with "OK".
8
7
55