Connecting A Programming Device - Siemens SIMATIC KTP400 Basic Operating Instructions Manual

Mounting and connecting
3.3 Connecting the HMI device
3.3.4

Connecting a programming device

A programming device provides the following options:
● Transferring projects.
● Transferring device images.
Connecting a programming device to a Basic Panel DP
Note
A programming device cannot be used to reset the HMI device to factory settings.
34
RS 422/ 485
PROFIBUS
RS 485
PG
1. Shut down the HMI device. Verify
that the DIP switch on the rear panel
of the HMI device is in the following
position:
2. Connect an RS 485 PROFIBUS
connector to the HMI device.
3. Connect an RS 485 PROFIBUS
connector to the programming
device.
KTP400 Basic, KTP600 Basic, KTP1000 Basic, TP1500 Basic
Operating Instructions, 08/2008, A5E01075587-01