Miele SmartLine CSDA 7000 FL Operating And Installation Instructions page 8

Downdraft extractor
Table of Contents

Advertisement

Warning and Safety instructions
This downdraft extractor must not be installed and operated in
mobile installations (e.g. on a ship).
Touching or tampering with electrical connections or components
and mechanical parts is highly dangerous to the user and can cause
operational faults.
Only open the housing as described in the installation instructions
and in the Cleaning and care section of this booklet. Under no
circumstances should any other parts of the housing be opened.
The manufacturer's warranty will be invalidated if the appliance is
not repaired by a Miele approved service technician.
Faulty components must only be replaced by genuine Miele spare
parts. The manufacturer can only guarantee the safety of the
appliance when Miele replacement parts are used.
The downdraft extractor is not intended for use with an external
timer switch or a remote control system.
If the plug is removed from the connection cable or if the cable is
supplied without a plug, the downdraft extractor must be connected
to the mains electricity supply by a suitably qualified electrician.
If the mains connection cable is damaged, it must be replaced
with a special connection cable type H 05 VV-F (PVC insulated),
available from Miele, by a Miele authorised service technician or
suitably qualified and competent electrician in order to avoid a
hazard (see "Electrical connection").
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents