Installation; Preparing The Worktop - Miele SmartLine CSDA 7000 FL Operating And Installation Instructions

Installation

Preparing the worktop

 Create the worktop cut-out.
Remember to maintain the minimum
safety distances (see "Safety
distances").
 Seal the cut surfaces of wooden
worktops with a suitable heat-
resistant sealant to avoid swelling
caused by moisture. The sealant
must be temperature-resistant.
Make sure the sealant does not
come into contact with the top
surface of the worktop.
Flush-fit installation
 For wooden worktops, secure the
wooden frames 5.5 mm below the
upper edge of the worktop.
For CS 7611 FL, the wooden frame
must be secured 7 mm under the
upper edge of the worktop.
44