Installation
Loosen the lug and pull the plug out.
Loosen the strain relief screw and
unlock the casing on both sides .
Open the casing.
Remove the stopper.
Exchange the jumper with the
connection cable of the switching
system.
Close the casing.
Tighten the strain relief screw.
Reinsert the plug.
48
Connecting the e-box
Connect the fan power cable and fan
control cable to the e-box and the
fan.
Connect the control unit cable to the
e-box.
The socket positions are designed in
such a way that they cannot be mixed
up.
Connect the downdraft extractor to
the mains electricity supply.
Check that the downdraft extractor
works.