Operation; Flameguard; Switching The Downdraft Extractor On; Setting/Changing The Power Level - Miele SmartLine CSDA 7000 FL Operating And Installation Instructions

Operation

FlameGuard

 Fit the magnetic FlameGuard in
position next to the downdraft
extractor when you are operating a
gas cooktop or a gas wok burner
directly next to the extractor.
Switching the downdraft
extractor on
The downdraft extractor must only be
operated when the FlameGuard has
been removed from completely
covering the extractor.
 Remove the FlameGuard.
 Touch the  sensor.
The sensor controls will light up.
If no further entry is made, the
downdraft extractor will switch itself
off after a few seconds.
20
Setting/Changing the power
level
For light to heavy cooking vapours and
odours, select from power levels 1 to 3.
For short periods of cooking food with
intensive vapours and a strong aroma,
e.g. when searing meat, select Booster
setting B.
 Touch the required power level.
Booster
The maximum duration for the Booster
is 10 minutes.
 To switch the Booster off early, set a
different power level.
Switching the downdraft
extractor off
 Touch the  sensor.
The sensor controls go out.
If the downdraft extractor is not
switched off, it will switch itself off
12 hours after the last automatic
operation.