English
The Configuration Tool
Configuring the Serial Modem with the Configuration Tool
The configuration tool provides a practical way of making "basic settings" such as modem
name, IP address and baudrate of the Serial Modem.
For this purpose, the configuration tool is started and finds all Serial Modems in the same
network segment which it then lists in a table.
All settings can also be made with AT commands via the serial interface. Password
protection and protected call acceptance are only possible via this interface.
Overview Window
The configuration program finds all devices in its own network segment, even those without
a valid IP address.
Clicking on the column header in the overview, e.g. "IP address", sorts the devices in
ascending or descending order of the items in that column.
Items in the Overview Window:
Name
IP Address
Subnet Mask
Gateway
MAC
Device Type
Version
34 / 77
Modem name for better identification by means of a self-
explanatory text.
Current IP address
Current Subnet Mask
Current Gateway
Worldwide unique MAC address
Device Type
Current firmware version
7XV5655-0BB00
C53000-G1176-C175-2