Chapter 3 - Guest Check Functions
3.10.5 Combine Stored Checks to One Table
This procedure is identical to using {ADD~TO~TABLE} except it
depends on ONE CHK/TBL in the System Setup/System Config.
Table (page 4 #2).
•
YES will add items from both checks to the resulting check.
•
NO will add a separate check to the table number.
ONE CHK/TBL set to NO
1. Enter items for a new check, or recall a stored check.
2. Index the table number of the check to which the current check
will be combined.
3. Press {TABLE~#}.
•
The current check becomes a separate check for that table.
ONE CHK/TBL set to YES
1. Recall a stored check.
2. Index the table number of the check to which the current check
will be combined.
3. Prompt line displays message:
4. Press YES.
5. Screen displays a message "Check still opened" then prompts:
6. Press YES.
•
Items from the current check are added to the check number
entered. That check now displays on the screen.
7. End the service round by pressing {TOTAL}, {MEDIA} or
{PRINT~CHECK}.
FS-3600 Owner's Manual
Change table?
Add Check?
Combine Checks
3-39