Removing The Under Box Cover; Removing The Sub Pcb; Removing The Ottoman - Panasonic EP-MA03 Service Manual

9.6. Removing
Cover
1. Remove the rear cover (see 9.2).
2. Remove the leg cover (see 9.5).
3. Remove two screws fixing the under box cover in place,
and pull forwards.
Caution:
• During assembly, align the grooves on the top of the
under box cover with four hooks on the bottom of the
under box to attach.
9.7.

Removing the Sub PCB

1. Remove the rear cover (see 9.2).
2. Remove the leg cover (see 9.5).
3. Remove the under box cover (see 9.6).
4. Remove all the connectors.
the Under Box
5. Remove two screws fixing the Sub PCB in place, and two
board spacers.
Caution:
• Ensure that the hooks are released before removing the
connectors. Failure to do so may result in damage to the
PCB or connectors.
• Using an appropriate jig will make it easier to remove the
board spacers.
9.8.

Removing the Ottoman

1. Remove the left-hand armrest (see 9.1).
2. Perform steps 3 to 6 from "9.3. Removing the seat cush-
ion"
3. Remove the screws (one each on right and left) fixing the
Ottoman to the main unit.
4. Remove three Brushclips attached to the front of the
underside cover and the fabric.
37