EP1285
ORDER NO.0808U08C1
8. Adjust the length from the bottom to approx. 0.4 in.
(10mm).
If the Massage mechanism block is too high, turn the
Up/down sensor gear clockwise to adjust.
If the Massage mechanism block is too low, turn the
Up/down sensor gear counterclockwise to adjust.
5.8. Removing the Massage wheel cover
1. Execute all the procedures of 5.1. Removing the
Headrest, Back cushion, and Armrests.
2. Move the Massage mechanism block to the middle and
unscrew eight Screws.
3. Cut the Cable tie, which fixes the Cords to the Rear
frame, and unscrew one Screw, which fixes the Cord wire.
- 28 -