Table of Contents
Advertisement
Resuming playback from the location last
stopped (Title resume)
The recorder memorizes the location you last stopped
playback to resume from there.
To use this function, set "HDD/RAM title play" (
page 183) to "Title resume." The recorder will
memorize the location you last stopped at in each title,
so you can resume playback from there. For example,
if there are 6 titles, you can start each of them as if
you had stored 6 video tapes in the recorder.
• To return to the beginning of the title
During playback, press QUICK MENU button, then
press
/
buttons to select "Restart title," then
press ENTER button.
• To play another title
Press CONTENT MENU button to display
"CONTENT MENU Title List," then select a title.
You can make the recorder memorize only the very
last point, regardless of the number of titles. Set
"HDD/RAM title play" (
playback."
• To return to the beginning of the title
Press SKIP (
) button repeatedly until the
beginning of the title appears.
• To play the other title
Press SKIP (
/
Notes
• Depending on conditions or contents, playback may not
start from the location last stopped at, but instead another
location. For example, from the beginning of the disc or
title.
• Depending on a disc, there may be a slight difference
between the location the recorder memorizes and the
actual location where playback starts.
• This function is not available on DVD-R/RW discs.
• The resuming function will not work if the write-protect tab
is set to "PROTECT" (
page 8).
page 183) to "Serial
) button repeatedly.
Playing the digest (Skip Search)
This feature repeats playback of about 5 seconds and
skip of 1 minute from the beginning to the end of a
recorded title, so that you can view the digest of it.
1) Perform steps 1 and 2 on
select a title that you want to view the digest.
2) Press QUICK MENU.
Quick Menu is displayed.
3) Press
/
to select "Special playback mode",
then press ENTER.
4) Press
/
to select "Skip search", then press
ENTER.
The Skip Search starts.
Notes
• This feature can be used for only one title (original)
recorded on the HDD or a DVD-RAM disc.
• While using this feature, you cannot use speed-related
functions such as fast forward or fast reverse.
• If you press ENTER button while using this feature, the
normal playback starts.
• To cancel this feature, press STOP button twice.
Viewing the first scene of a title (Original)
(Intro scan)
1) After step 1 on
Quick Menu appears.
2) Press
/
to select "Special playback mode",
then press ENTER.
3) Press
/
to select "Intro scan", then press
ENTER.
The recorder plays the first 5 seconds of each title
beginning from title 1.
You can go forward or back by pressing SKIP
buttons.
: to go to the next title.
: to go back to the current title.
Press twice to go back to the previous title.
4) When you find a desired title, press ENTER.
The selected title is played.
Notes
• To stop Intro Scan, press STOP button twice.
• This feature can be used for only titles (Original) recorded
on the HDD or a DVD-RAM disc.
Playing all titles (original/playlist) in a disc
Set "HDD/RAM title play" (
playback". You can play all titles in the HDD and DVD-
RAM disc in the order of the thumbnails on CONTENT
MENU, as if they were recorded in one video tape.
page 60, and
page 60, press QUICK MENU.
page 183) to "Serial
63
Advertisement
Table of Contents
