Table of Contents
Advertisement
Network Navi
Network Navi features (Continued)
Directly connecting Net Dubbing compatible
models
By directly connecting with the Net Dubbing
compatible device, you can dub without the network
environment. It is necessary to set the compatible
device's IP address to an address that is different but
within the same subnet as the recorder's.
Recorder
To LAN port
LAN cable (crossover type, included)
1 Make the "Network Setting" on
Setup as in the example below.
• DHCP:
Not used (both for the recorder and compatible)
• IP Address
192.168.1.10 (IP address of the recorder)
192.168.1.15 (separate compatible device)
• Subnet Mask:
255.255.255.0 (for both the recorder and
compatible device)
• Default Gateway:
192.168.1.1 (for both the recorder and compatible
device)
• DNS Server:
192.168.1.1 (for both the recorder and compatible
device)
2 Select "Save" to save the settings.
If you want to abort the copy/move
1 Press QUICK MENU while the copy/move is in
process.
"Quick Menu" will be displayed.
2 Select "Cancel Dubbing" using
ENTER.
Notes
• If you abort copy/transfer, the portion being dubbed will be
deleted at the dubbing destination.
• For DVD-R, there will be reduced space from any amount
of content that has already been written even though the
process may have been aborted.
164
Net Dubbing compatible device
To LAN port
page 147.
/ , then press
Advertisement
Table of Contents
