Network Navi
Network Navi features (Continued)
If you are having a difficulty with Network Navi features...
The following are Network Navi features each of which must be set for proper operation.
Complete the basic settings as in the table below, and then make appropriate changes to the settings.
If the Network Navi features are not operating, check the settings again to make sure all inputs are
correct.
Network Navi Features
Network Navi
Virtual Remote Control
Net Dubbing
Setting a timer recording
using email
Net Monitor
170
Operating Environment/Basic Settings
®
• OS:Windows
2000/XP
Mac OS X(10.4)
• JAVA VM Ver.1.5 (For Mac OS X: 1.4.2)
• Network Setting
®
• OS:Windows
2000/XP
Mac OS X(10.4)
• JAVA VM Ver.1.5 (For Mac OS X: 1.4.2)
• Network Setting
• OS:Windows
®
2000/XP
Mac OS X (10.4)
• Network Setting
®
• OS:Windows
2000/XP
Mac OS X (10.4)
• Network Setting
– An always-on connection environment is
required.
• OS:Windows
®
2000/XP
Mac OS X(10.4)
• Internet Explorer 6.0 (Safari 2.0 for Mac
OS X)
• Java VM Ver.1.5 (For Mac OS X: 1.4.2)
• Network Setting
Required Settings
• Other settings
– Port Number
• Settings for Net Dubbing
– Set "Request from another device" to "Accept".
– Enter a group name. (Set the same group name for
all the devices that you wish to dub.)
– Enter the group password. (Set the same password
for all the devices that you wish to dub.)
• Mail Setting
• Installation and settings of QuickTime
• Settings for Net Monitor
®
(v. 7.0.2)