Picture/Audio Settings - Toshiba RD-XS55KU Owner's Manual

Hdd/dvd video recorder
Hide thumbs Also See for RD-XS55KU:
Table of Contents

Advertisement

Picture/Audio settings

Pause/Still
HDD
DVD-RAM
DVD-RW
DVD-R
Auto:
Normal setting. Pause the moving image without
blurring.
Frame:
Displays high resolution still image.
Output Black level
HDD
DVD-RAM
DVD-RW
DVD-R
You can adjust the black level of the output signal.
Standard:
Normal black level.
Enhanced:
To display deeper, richer black than in "Standard"
setting.
Note
• This function is not available when the HDMI connection is
used.
Custom picture select
HDD
DVD-RAM
DVD-RW
DVD-R
Select from between 4 picture settings (Normal, Setting
1-3) you stored in the memory.
Note
• This setting is not available when the HDMI connection is
used.
Custom picture setting
HDD
DVD-RAM
DVD-RW
DVD-R
You can adjust fine picture quality and store up to 3
custom picture settings in the memory of the recorder.
1) Press
/
button to select a desired setting
from 3 settings, and then press ENTER
button.
e.g.
Picture/Audio settings
Pause / Still
Output Black level
Custom picture select
Custom picture setting
Progressive conversion
Play DNR
Audio out select
Virtual surround
SAP
DVD-VIDEO
DVD-VIDEO
VCD
DVD-VIDEO
VCD
DVD-VIDEO
VCD
Auto
Setting 1
Standard
Setting 2
Setting 3
Normal
Auto
Bitstream
Off
Off
SETUP
2) Press
/
buttons to select adjustable
items, and then press
each parameter.
Brightness
(0) Darker ⇔ Brighter (14)
Contrast
(–7) Lower ⇔ Higher (7)
Color
(–7) Duller ⇔ Brighter (7)
Tint
(–7) Red ⇔ Green (7)
Edge Enhance
Soft/OFF/Sharp
Gamma
OFF/1/2
3) After adjusting the items, press ENTER
button.
Note
• This setting is not available when the HDMI connection is used.
Progressive conversion
HDD
DVD-RAM
DVD-RW
DVD-R
There are two types of source content in pictures
recorded in DVD video discs: film content (pictures
recorded from films at 24 frames per second) and video
content (video signals recorded at 30 frames per
second). Make this selection according to the type of
content being viewed.
Auto:
Select this position normally.
The DVD player automatically detects source content,
film or video, of playback source, and converts that
signal in the progressive output format in an
appropriate method.
Video:
The DVD player filters video signal, and converts it in
the progressive output format appropriately.
Suitable for playback of video content pictures.
Film:
The DVD player converts film content pictures in the
progressive output format appropriately.
Suitable for playback of film content pictures.
The progressive output feature will be most effective
under this selection.
Note
• Depending on a disc, pictures may be cut off or doubled.
/
buttons to select
DVD-VIDEO
VCD
179

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rd-xs55

Table of Contents