Net Dubbing; Dubbing To A Device On The Same Network - Toshiba RD-XS55KU Owner's Manual

Net Dubbing

You can perform dubbing by designating equipment (Toshiba's HDD & DVD video recorder) on the same
network as the dubbing destination.
Net Dubbing can also be performed in "Dub Select Items".
The following conditions are required to use this feature.
• The model must be compatible with Net Dubbing.
• It must have the same subnet connection as the recorder (such as by being connected to the same router or being
directly connected to each other by a crossover cable).
• The setup is done in "Net Dubbing Settings" under Network Setting.
- Set "Request from another device" to "Accept".
- Give a "Group Name". (All devices that you want to dub must be set with the same group name.)
- Set a "Group Password". (All devices that you want to dub must be set with the same password.)
These devices must be in the following conditions.
1 Their power is on. (Insert a disc if applicable.)
2 They are in stop mode.
The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other
materials is prohibited under the Copyright Laws of the United States and other countries, and may subject
you to civil and criminal liability.
Dubbing to a device on the same
network
1 Select a part to copy/move on "Edit Menu", then
press QUICK MENU. Select "Change media to
NET" from "Quick Menu", then press ENTER.
When you first select the part that you want to dub
and then switch to the dubbing destination, a
message will be displayed. If you do not want to
cancel the selected part, choose "No".
EDIT
Dub Selected
Items
MENU
Device select
Device name
RD-Z1
TAKASHI
TARO _ 1
TARO _ 2
Source will be Title.
TARO _ 3
CHIHIRO
MIRINA
LOVE
Capacity
A A A
B B
Dub Selected Items
Select a destination for dubbing, and then a display
will appear on the screen. The display will show the
devices within the network that can be specified as
a dubbing destination (up to 8 devices).
2 Select a network device name using
press ENTER.
Multiple devices cannot be selected.
3 Select the destination for dubbing using
then press ENTER.
Dubbing will begin.
HDD
Title Original
Searching
Dubbing Media
HDD DVD
HDD DVD
HDD DVD
HDD DVD
Dub To: DVD
HDD DVD
HDD DVD
HDD DVD
HDD DVD
Start
/ , then
/ ,
You can use a setting to automatically shut off the
power after dubbing is completed. (You cannot use
this setting for the device that is the dubbing
destination.)
During the dubbing, press QUICK MENU and
select "Auto Power OFF" using
ENTER.
Even if you selected "Auto Power OFF", the power
may not switch off for certain cases such as when a
timer recording has started.
Notes
• This feature is available only for models that are compatible
with Net Dubbing. A drive that was not expected at the
release of the recorder may be recognized in the future. In
such a case, the drive column may show a number such as
#5 when connecting to a future model. This is not a
malfunction. After you check which drive it is, perform the
dubbing. In addition, there may be some future model in
which dubbing may not be supported to some drives.
• In Net Dubbing, only copying can be done. Therefore,
dubbing cannot be done for copy-prohibited titles and
chapters of copy-once programs.
• A DVD-R/RW (Video mode) cannot be used as a dubbing
destination or origin.
• Net Dubbing is a feature of High speed dubbing. Rate
conversion dubbing cannot be done.
• Net Dubbing will be interrupted if a timer recording starts
during Net Dubbing. Redo Net Dubbing after the
completion of the timer recording.
• When using the Net Dubbing feature, noises may occur on
images received by the recorder's tuner and external input
due to the increase in data access of the network. Usage
of Net Dubbing is recommended when recording from
these inputs is not being performed.
/ , then press
163