Tv Operation - Toshiba MW26H82 Owner's Manual

TV operation

TV operation
1
To turn on the unit, press POWER.
The Power indicator will light.
• Every time you turn on the TV, the
unit starts from TV mode. When
you use TV after DVD operation,
press TV/VCR.
2 Adjust the volume level by pressing VOL
The volume level will be indicated
on the screen by green bars. As the
volume level increases, so do the
number of bars. If the volume
decreases, the number of green
bars also decreases.
3
Set the TV/CABLE selection to the appropriate
position .
27
TV
CABLE - Cable TV channels
5V90101A [E]p24-31
+ –
or .
VOLUME 32
- VHF/UHF channels
25
4 Press Direct channel selection buttons (0–9)
or
or CH to select the channel.
TO SELECT ANALOG CHANNELS
When the TV/CABLE selection is in the CABLE
position, channels can be selected as follows:
TO SELECT CABLE TV CHANNELS:
1-9: Press 0 twice, then 1-9 as needed.
Example, to select channel 2, press 0 0 2.
10-99: Press 0, then the remaining 2 digits.
Example, to select channel 12, press 0 1
2.
100-125: Press the 3 digits in order. Example, to
select channel 120, press 1 2 0.
TO SELECT DIGITAL CHANNELS
Press the first 3 digits, then press the "–/DISPLAY"
button, followed by the remaining 3 digits.
Example, to select channel 015-001, press 0 1 5 –
0 0 1.
TV Cable TV
VHF VHF
2-13
2-13
STD/HRC/IRC
UHF
14-69 14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100) (125)
01
(5A)
Notes:
• If a channel with no broadcast is selected, the sound will auto-
matically be muted.
• If a station being viewed stops broadcasting, the TV will auto-
matically shut itself off after 15 minutes.
• Digital cable channels may be represented by channel
numbers that include a "dash" (e.g., 85–002). These digital
channel numbers may not match the numbers in the
channel line-up provided by your cable company. This is not
a malfunction.
8/4/06, 5:44 PM
TV/VCR
POWER
0–9/–
VOL +/–
CH /
ANT TV
7
25