Other Functions (Vcr); Duplicating A Video Tape - Toshiba MW26H82 Owner's Manual

Other functions (VCR)

Duplicating a video tape

If you connect the unit to another VCR or Camcorder, you can
duplicate a previously recorded tape. Make all connections before
turning on the power.
Duplicating a video tape
Preparation:
• Press TV/VCR to select the TV/VCR mode.
• Load a cassette tape with the erase prevention tab
intact.
• Load a previously recorded tape into the playback
VCR or Camcorder.
1 Press SPEED to select the desired tape speed
SP or SLP.
It is recommended to set the Speed to
the SP mode on the recording VCR
for best results.
2 Press INPUT repeatedly to select VIDEO1 or
VIDEO2.
VIDEO1: on
the rear panel
VIDEO2: on
the front panel
Press REC.
3
4
Press PLAY on the playback VCR or camcorder.
5 Press STOP when you finish after duplicating.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs and other materials,
is prohibited under the Copyright Laws of the United States
and other countries, and may subject you to civil and/or crimi-
nal liability.
5V90101A [E]p52-56
SOURCE SELECTION
0. ANT
1. VIDEO1
2. VIDEO2
3. ColorStream HD
4. HDMI
/ 0-4:SELECT
55
Connection with second video recorder
• Select "VIDEO1" on step 2.
Playback VCR
To VIDEO OUT
Audio/Video cable (not supplied)
Recording VCR
To AUDIO (R) IN
Connection with Camcorder
• Select "VIDEO2" on step 2.
Playback Camcorder
Recording VCR
To AUDIO (R) IN
To AUDIO (L) IN
To VIDEO IN
Audio/Video cable (not supplied)
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer's
instructions. A typical camcorder dubbing hookup is
shown above.
8/4/06, 5:47 PM
TV/VCR
INPUT
STOP
REC
SPEED
To AUDIO (R) OUT
To AUDIO (L) OUT
To VIDEO IN
To AUDIO (L) IN
To AV Jack
55