Connecting To Optional Equipment; Selecting The Video Input Source - Toshiba MW26H82 Owner's Manual

Connecting to optional equipment

Before connecting the unit to other equipment, be sure to turn off the power and
unplug all of the equipment from the wall outlet before making any connections.
You can enjoy the camcorder or high quality dynamic sounds of DVD video discs or
audio CDs by connecting the unit to optional audio equipment.

Selecting the video input source

Press INPUT to view a signal from another device connected to your TV, such as a VCR
or DVD player. You can select ANT, VIDEO1, VIDEO2 (on the front panel), ColorStream
HD or HDMI depending on which input jacks you used to connect your devices.
Press INPUT on the remote control to display the current signal source.
To change the input source, press INPUT again or press 0-4.
Connecting to a camcorder
To playback from the camcorder, connect the camcorder to the unit as shown. And select "VIDEO2" input source.
Signal flow
To Audio/Video out
Notes:
• If your camcorder has S-video, you can use an S-video cable (plus the standard audio cables) instead of a standard video
cable for better picture quality. Do not connect both a standard video cable and an S-video cable at the same time, or the
picture performance will be unacceptable.
• You can also use the S-VIDEO IN or AUDIO(L/R)/VIDEO IN jacks on the rear of the unit.
Connecting to a DTV receiver / set-top box with ColorStream
This connection allows you to watch DTV (digital TV) and TV programs, and record DTV and TV programs.
Your TV has ColorStream ® (component video) inputs. Connecting your TV to a DTV receiver with component video can greatly
enhance picture quality and realism.
Signal flow
DTV receiver / set-top box
To
component
video out
5V90101A [E]p13-19
To S-Video out
S-Video cable (not supplied)
(yellow)
(white)
Audio/Video cable (not supplied)
(red)
To audio out
To COMPONENT
AUDIO IN
Component video cable (not supplied)
15
0–4
INPUT
SOURCE SELECTION
0. ANT
1. VIDEO1
2. VIDEO2
3. ColorStream HD
4. HDMI
/ 0-4:SELECT
To S-Video IN
To AUDIO (L/R)
To Video IN
(yellow)
IN
®
(component video)
Rear of the unit
To COMPONENT
VIDEO IN jacks
(Y) (P ) (P )
R B
8/4/06, 5:43 PM
(white, red)
15