Transducer Wires
Optional Auxiliary-In
Cable
Chromatherapy
Cable (If Equipped)
8. Connect the Cables
Route the bound transducer wires to the control amplifier location. Drill 1" (52 mm) holes where
needed.
If equipped, route the chromatherapy cable to the planned amplifier location. Follow the same route
as the transducer wires.
Route the inter-connect cable to the control amplifier location. Include a drip loop.
Route the user interface cable to the planned user interface location. Include a drip loop.
NOTE: An auxiliary cable connection can be used to pair a BLUETOOTH
battery-operated audio device so users can play their own music with the vibracoustic bath.
If used, route an auxiliary-in cable (not included) to the control amplifier location.
Kohler Co.
Inter-Connect
Cable
Heated Surface
Control
13
User Interface
Transducer
Control
device or other
®
1237790-2-D